You can have the ducts cleaned or just not worry about it. They will dry out fairly quickly. Hopefully it was mainly water and not less pleasant things. Take out the vent, use a towel to clean what you can and maybe spray some disinfectant down the vent.
I fixed my toilet with a rotor.
Many 'slow' water leaks will waste several gallons of water a day. Also, the floor around the toilet can be damaged if the leak is dripping onto the floor. Toilet repair kits are very cheap, and easy to install. Check at your local hardware store, Home Depot, or Lowe's.
A toilet water hammer is caused by a sudden increase in water pressure in the pipes. It can be fixed by installing a water hammer arrestor or adjusting the water pressure regulator.
It is your toilet that caused the damage and therefore your responsibility.
Yes, a leaking toilet tank can be fixed by replacing the flapper valve or adjusting the fill valve.
A toilet may leak from the bottom due to a damaged wax ring or a loose connection between the toilet and the floor. To fix this issue, the wax ring should be replaced or the toilet should be resealed to the floor.
Yes, a toilet leaking from the floor can be fixed by replacing the wax ring seal between the toilet and the floor. This involves removing the toilet, replacing the wax ring, and reseating the toilet properly. It is recommended to seek professional help if you are not experienced with plumbing repairs.
Common causes of a toilet leak at the base include a damaged wax ring, loose bolts, or a cracked toilet base. To fix it, you can replace the wax ring, tighten the bolts, or replace the toilet if it is cracked.
Common signs of a toilet leak include water pooling around the base of the toilet, a constantly running toilet, and a noticeable increase in water bills. To fix a toilet leak, you can try tightening the bolts at the base of the toilet, replacing the wax ring, or calling a plumber for professional assistance.
Common issues that can arise with a toilet tank include leaks, running water, and a malfunctioning flush mechanism. Leaks can be fixed by replacing the flapper or tightening connections. Running water may be due to a faulty fill valve, which can be replaced. A malfunctioning flush mechanism can be fixed by adjusting the chain or replacing the handle.
The toilet bolt is spinning because the nut securing it is loose. To fix this, tighten the nut using a wrench or pliers until the bolt is secure and no longer spins.
A running toilet is usually caused by a faulty flapper or fill valve. To fix it, you can try adjusting the chain on the flapper or replacing the flapper or fill valve.