Usually wired connection provides better stability and it is not prone to EM interference and RF noise as wireless connection. But if you have a good quality wireless adapter in your printer you will not see any difference.
It depends on configuration of your network. If you work in a big office, it might be a good idea to use wired connection. For smaller network with a moderate load, wireless should do just fine.
It's a matter of choice. If you like flexibility laptop will be better for you. If you do not mind to have your computer at the same place desktop will work for you.
That is the SSID, the Service Set Identifier. It is better understood as the name of the wireless network.
If the printer is connected to another computer via a cable, then you need something for the wireless computer to connect to. It would either have to connect to a wireless router or you could have a wireless card in the other computer and configure the two to talk to each other. But using a router is a far better solution. Then you can setup the printer as shared from the first computer and configure the two comptuers to be in the same workgroup and share it that way.
In a way they are. If you want to use the printer from multiple computers using a wireless connection, the wireless printer is the right one for you. They are also great for cutting down on clutter. However, they are more expensive.
A Brothers wireless printer is considered a better value printer than most other wireless printers. They are also more compact than others. Check out a site such as Amazon to see if they're available for purchase.
Some printers have a wireless adapter, but most of them don't. There are two cases. You connect the printer to a computer which has a wireless adapter, or if your printer has a lan card you can connect it to your wireless router and use advantages of wireless networking in that way.
Wireless internet providers work just as well as network connections. The only difference is that network connections are more controlled, since they are connected to an official server.
A standard wireless router can only physically connect to four Ethernet enabled devices through the Ethernet ports. To extend a wireless home network, a bridge is needed. A bridge is a device that will connect devices such as gaming consoles and TVs to the existing wireless internet network that is enabled by a router. Additionally, a bridge will also extend the range of a home network, allowing for better reception to other computers and devices that are already connected to the network through wireless adapters.
There are many options for a HP network printer. If one requires fast printing in bulk for the office, once can use the LaserJet model. For photographic printing, the Photosmart is better choice.
Those are 2 different things. There are cable modems and DSL modems. Wireless refers to a type of network which can be based either on a Cable modem or a DSL modem. You can have a wired network, or a wireless network. Wireless networks have typically have had slower transfer rates than wired networks, but the technology is changing so wireless routers are becoming faster in transferring data.
The iPad will connect to any standard wireless network - the broader the band the better.