Some printers have a wireless adapter, but most of them don't. There are two cases. You connect the printer to a computer which has a wireless adapter, or if your printer has a lan card you can connect it to your wireless router and use advantages of wireless networking in that way.
fixed wireless
It depends on what 277 volt device you are trying to connect.
Theoretically, you could connect three identical lamps in star (wye) and connect this to the three line conductors. But as you asked how to connect a (single) 230-V lamp to the supply, then the answer is by using a step-down transformer.
how to connect power capacitor with 3 phase motor
Connect the two 12 volts batteries in Series. Battery 1 & 2. Connect the negative post (-) of battery 1 to the negative (-) ground cable. Then connect the positive (+) post of battery 1 to the negative (-) post of battery 2. Connect the positive (+) post of battery 2 to the positive (+) cable. You now have 24 volts as the batteries are wired in series.
Laptop printers do not have to be wireless. You can have a USB cord that goes from the printer to your laptop that you can unplug when you're not using it.
through wireless modem
Depends on if the printer is wireless and if you are using a wireless cable. Most HP printers use a standard USB to printer cord. However, we would have to know the exact make and model of your computer to help you out
Yes probably. However, there's probably some more logical ways of connecting your desktop to your printer. 1. Does your printer have an ethernet port? If so, use this to connect to your switch or desktop NIC directly. 2. Does your desktop have a wireless card? Use this and connect to your printer. 3. If not 1 or 2, setup a wireless access point or get a wireless router with some ethernet ports. You'll easily be able to connect all your devices this way.
switch the printer on before the router
how do i get my laptop to pickup my cisco wireless router while using ubuntu. my laptop will not show wireless connect
yes you can connect the Lexmark E120N Laser Printer to your wireless network, it works great.
Directly you cannot do that. But you can do it available through wireless if you connect it to a computer which has a wireless adapter. After that you need to share the printer.
There are numerous Bluetooth devices that a person can hookup to a Dell laptop. Bluetooth has created a gadget that will allow one to connect a mouse, wireless keyboard or printer to a Dell laptop.
Wireless compatibility is a network issue, not a funciton of your computer or your printer. If your printer has the same network capabilities, yes, it's compatible.
no
There are four widely used systems and it largely depends on what you're printer supports. Bluetooth printers are available. So if your printer and laptop support bluetooth, it should be fairly straightforward to connect them. Wi-fi printers are also available, these are slightly more awkward to connect to the laptop as the intention is that wi-fi connects to a WAP (wireless access point), not all operating systems allow you to connect a laptop direct to a printer via wi-fi. A third option is wireless USB; this has two meanings: There is a wireless USB standard, for which products are starting to emerge. If your printer supports wireless USB, then that is the way to go. An alternative is a wireless USB extender, these are pairs of devices which can be used to interconnect devices. The fourth technology carries USB or UTP on the mains wiring; adaptors plug into mains sockets and allows you to interconnect devices using the main wiring.