It's easy once you pull the engine out a little.
The fuse panel is located on the driver side beside the parking brake. It is easy to get to but hard to change fuses.... be prepared to lay on the ground.
how easy is it to change a oil sump gasket on a ford fiesta 1.4 diesel 2008
In the back it's 6x9" easy to change too.
Fairly easy. remove the serpentine belt. Remove the pulley from the water pump. You need the sockets that fit those bolts and the sockets that fit the pump's mounting bolts. Get gasket sealer too.
Remove the belts, pulley, them bolts and gasket. Installation is the reverse of removal. Be happy you have so much extra space in front of your undersized engine. It made that very easy.
get me 2 do it 4 u just dun 1 there the day it easy
I have a 1994 jetta. easiest way is to take the intake manifold off using Allen screws. Be sure to catch the gasket between the upper and lower half of the manifold. This gives easy access to all spark plugs.
How easy is it to replace head gasket on 1994 firebird lt1 motor
No.
lol funny you got to drop the oil pan clean off old gasket and replace with new may need to use blue glue to hold gasket in place until you get the bolts started back in
Punto head gasket change is quite an easy job to do. It is almost impossible to give step by step instructions on these pages. The best that I could suggest, is for you to get a Haynes manual for the Punto this will show the exact procedure to follow.
you dont. the thermostat comes with a new gasket, its best to use it and its very easy to repalce, just scrape off the old one and put on the new one.