0
What else can I help you with?
How is salt obtained on a large scale from seawater and from salt mines?
it is actually a very efficient method......
How do univalves feed?
There is no such animal as a "univalve", however "bivalves" are filter feeders and filter seawater through their gills to pick up trace amounts of food.
In which property allow the separation of a sample of sand and seawater by filtration?
The property that allows the separation of a sample of sand and seawater by filtration is particle size. Sand particles are larger and solid, while seawater is a liquid solution containing dissolved salts and smaller particles. When the mixture is passed through a filter, the sand is trapped on the filter paper, while the seawater passes through, effectively separating the two components based on their differing physical states and sizes.
What are the materials needed to obtain fresh water from seawater?
It will need a Reverse Osmosis membrane to filter out salts from the water.
How long would it take to filter seawater naturally?
It all depends how much sea water you're talking about filtering...
How is sand useful?
Sand is an extremely efficient filter for anything
How do you get tiny grains of sand out of seawater?
One way to get tiny grains of sand out of seawater is to let the water sit undisturbed in a container for some time, allowing the sand to settle to the bottom. You can then carefully pour off the cleaner water, leaving the sand behind. Alternatively, you can use a fine mesh sieve or filter to physically separate the sand from the water.
What type of polarization are more efficient when used over sea water at frequency below 100MHz?
At frequencies below 100 MHz, vertical polarization is generally more efficient for radio wave transmission over seawater. This is due to the high conductivity of seawater, which can reflect and refract signals. Vertical polarization minimizes ground reflection losses and is less susceptible to the effects of seawater compared to horizontal polarization. Consequently, it enhances communication range and signal clarity in maritime environments.
What equipment and materials will you use in separating insoluble materials from seawater?
You can filter it off using a sinted glass crucible, fine filter paper, a vacuum pump and a side-arm flask. If you don't have that sort of equipment: a filter funnel, filter paper and a conical flask should do.
How do marine organisms extract the dissolved oxygen from seawater?
Marine organisms extract dissolved oxygen from seawater through their gills, lungs, or skin. These structures have respiratory surfaces with a large surface area, allowing for efficient exchange of oxygen and carbon dioxide with the surrounding water. Oxygen diffuses from the seawater into the organism's respiratory surface and is then transported to the cells for cellular respiration.
How do you get more hp from a 150cc dirt bike?
Replacing the air filter with more efficient one and removing the air filter snorkel. Replacing the stock muffler with more efficient one. Re-jetting the carburetor .
What are the countermeasures to blockage and rust caused by seawater?
The debris (seaweed, shellfish, garbage, etc.) in the sea water may cause the heat conduction inlet of the plate heat exchanger to be blocked, so these debris must be removed.For this purpose, an automatic backwash seawater filter needs to be installed. The perforated metal mesh with a mesh size of 2-3mm is suitable for the filter screen.In order to remove the rust caused by seawater microorganisms, the effective rust removal measures include the treatment of sodium hypochlorite produced by electrolysis of seawater and the circulation of warm water.Yuanzhuo equipment helps you solve more problems
