No, this is perfectly acceptable.
By bleeding the coolant system.
where is the coolant system thermostat on a ford focus 1.4 zetec engine
Remove the bottom hose from your 1995 Chevy Corvette radiator. Allow the coolant to drain out. Put a hose into the top of the radiator. Run water through the radiator until it runs clear.
The coolant should circulate through the entire water system.
A KX85 just needs regular green premixed engine coolant. To replace the coolant in the engine system, simply drain the current coolant and refill. There is no need to flush the system before replacing.
Yes.
The normal direction of circulation in the coolant system would push the coolant out the thermostat opening.
There may be a system leak.
when the engine is running and coolant will become hot to its operating temperature,the cooling system is under pressure,coolant will overflow and goes to coolant reservoir.when the engine goes cold coolant will go back to the rediator.
Ive never heard of draining coolant plugs except on a diesel engine . Once you drain the coolant and flush the system it should be fine
It cycles coolant through the engine. Heat from the engine is transferred to the coolant through a heat exchange. The heated coolant then cycles through the system to the radiator, where heat from the coolant undergoes another heat exchange, transferring heat from the coolant to the air which passes through the radiator. Heat will also transfer from the motor to the air forced over the motor by the engine fan.
It cycles coolant through the engine. Heat from the engine is transferred to the coolant through a heat exchange. The heated coolant then cycles through the system to the radiator, where heat from the coolant undergoes another heat exchange, transferring heat from the coolant to the air which passes through the radiator. Heat will also transfer from the motor to the air forced over the motor by the engine fan.