Only if you lost compression. The heat may have damaged the rings. The rings are like spring steel if heated to much the tension will leave and the seal to the cylender wall will be lost
could be bad piston rings,are your spark plugs oily,is your carb.tuned right,your intake manifold could be leaking
A bent engine piston is a reference to the piston rod. The piston cannot be bent, but the piston rod can be bent.
Piston in an engine is in the first class of lever.
Pistons are a major part of the engine and if one goes bad there ain't no fixing a piston, replacement is necessary.
If the timing is too high on an engine it causes the gas/air mixture to pre-ignite before the piston gets to top-dead-center. All the valves are closed at this time, causing an excessive amount of heat to be stored in the cylinder walls. And the same applies if the timing is too low, but it does it after the piston has passed top-dead-center, and the engine usually runs worse.
piston is a plunger that moves ups and down in the engine block.the function of the piston is to compress air mixtures in the engine block
piston
The engine had a bad piston
Running an engine with broken piston rings will cause damaging scoring in the piston chamber, and is not to be recommended.
The volume between the engine head and piston when the piston is in the head dead center piston R - is expressed in cubic inches
Airplane is a device powered either by a piston engine and prop or by a jet engine.
what is piston order of 3.8 amc engine