It may damage the cord. You may or may not have a problem if you pull a plug from a socket by its cord. The cord contains wires which are attached, inside the plug, to the protruding blades that enter the socket. That attachment may be very firm, or possibly not so firm. In addition, some plugs fit very firmly inside a socket and consequently are difficult to pull out, and others fit very loosely and are easy to pull out. In the worst case scenario, in which the wires are weakly attached inside the plug, and the plug fits firmly in the socket, the result of pulling the plug out by the cord may be that the wires will become disconnected inside the plug, which will then cease to work properly. And even if the wires do not become immediately disconnected, you may be progressively weakening the connection, if you habitually pull out a plug by means of the cord. Eventually the wiring will fail.
you can get an electric shock from an extention cord because if you are Vaccuming your car and you pull the extention cord out of the plug you will get a 2-5 second shock
If your question is can you use a #6 flexible SOOW cord and put a 30 amp plug on it, then yes. The breaker that feeds the receptacle that the cord will plug into can be no larger than a 30 amp breaker. What limits the cord capacity to 30 amps is the ratings of the plug on the end of the cord.
they are on a cord that you pull
I don't know about an extension cord, but they do sell plug adabters. You can pick them up at any hardware store or even Wal-Mart. They are ussaully grey or orange , and look like the plug end of the extension cord. One end will have the 2 prong, the other side will have the slots to plug in the three prong.
pull the cord?ok
Try pulling out the spark plug and clearing the cylinder
To "pull the plug" on something usually means to stop or end it: frequently abruptly, like how an appliance will stop all of a sudden when you pull out its power cord.
It may damage the cord. You may or may not have a problem if you pull a plug from a socket by its cord. The cord contains wires which are attached, inside the plug, to the protruding blades that enter the socket. That attachment may be very firm, or possibly not so firm. In addition, some plugs fit very firmly inside a socket and consequently are difficult to pull out, and others fit very loosely and are easy to pull out. In the worst case scenario, in which the wires are weakly attached inside the plug, and the plug fits firmly in the socket, the result of pulling the plug out by the cord may be that the wires will become disconnected inside the plug, which will then cease to work properly. And even if the wires do not become immediately disconnected, you may be progressively weakening the connection, if you habitually pull out a plug by means of the cord. Eventually the wiring will fail.
you can get an electric shock from an extention cord because if you are Vaccuming your car and you pull the extention cord out of the plug you will get a 2-5 second shock
There is a plug like an extension cord, usually behind or below the passenger headlight sometimes even down to the bumper somewhere, sometimes they are hard to find, but pull it out where it is easy to reach an plug it into an extension cord.
I would start with the pull cord rapped off the recoil pulley, flywheel brake if you have one jambed, oil in cylinder pull spark plug and try to pull over or it could be some thing rapped around the blade. hope this helps
Perfectly fine i would recommend it.
You can plug an extension cord into another extension cord. A extension cord is to help make doing something easier.
You will only be shocked if you touch the prongs while they are still in the socket or if there is a defect in the cord or plug. If you be sure to touch only the plastic part you should be fine.
You can start it by using the pull cord, just be sure the key is in the ON position.
it depends on what it is on.