0
Is it possible for a pilot generator to become weak and only open a 750MV gas valve partially to give the burner a low flame output?
Wiki User
∙ 15y ago
The way I understand it ... no. The pilot generator is a thermally sensitive on/off switch. It simply tells the valve to open or close. If the unit turns on and fires it would seem the pilot generator has worked correctly. Since the amount of gas flow is the issue, it would seem the gas valve is the culprit and is not opening all the way. Of course, to be certain have a pro check it. If you must, a pilot generator is cheap and easy to replace without a professional, and replacement would quickly determine if the pilot generator was At Fault.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
1000 watt generator power can it power a oil burner?
Watts = amps x volts. 1000/120 = 8.3. Assuming the oil burner motor is 120V then the generator has the ability to produce 8.3 amps. Find the amperage on the burner pump motor, if it is in this range it will work. The closer the pump amperage is to the generator output the more effect it will have on slowing the generator down on the start. Motors draw up to 300% on start up, this is what makes the generator lag when a motor is connected as a load.
Different kinds of burner?
Three types of laboratory burners are the Tirrill Burner, Bunsen Burner, and the Meker Burner. The Tirrill and Meker Burner have air and gas adjustments while the Bunsen Burner has only an air adjustment. Hope that helps.
What is the difference between a Fisher burner and a Bunsen burner?
the deffirence between terrill burner & bunsen burner is that terrill burner has a greater flexibility in the adjustment of the air-gas mixture which bunsen burner cannot .
What is the use of a burner?
The burner is a tool for heating in laboratory.
What is a gas burner in a lab that is not the Bunsen burner?
etna synonym | Thesaurus.com Main Entry: Bunsen burner. Part of Speech: noun. Definition: laboratory gas burner. Synonyms: burner, element, etna, gas jet, heating element, jet, ..
1000 watt generator power can it power a oil burner?
Watts = amps x volts. 1000/120 = 8.3. Assuming the oil burner motor is 120V then the generator has the ability to produce 8.3 amps. Find the amperage on the burner pump motor, if it is in this range it will work. The closer the pump amperage is to the generator output the more effect it will have on slowing the generator down on the start. Motors draw up to 300% on start up, this is what makes the generator lag when a motor is connected as a load.
What is an electric burner?
A burner on a stove that uses electricity to become hot and, you know dude, cook stuff
When does the flame of the burner become big?
sa Year-III GALLANTRY :>
Can a whole turkey be grilled on a 2 burner gas grill?
Yes it is possible.
Where is it possible to purchase Taylor Made Burner Irons?
It is possible to purchase TaylorMade Burner Irons from a number of retailers. These include specialist golf retailers such as Golfsmith and Golf Discount as well as larger general retailers such as Amazon and eBay.
Is it possible to produce the same effect with aluminum fiol as to the basic oven?
You could heat it with a Bunsen burner.
What is the purpose of the burner?
A science burner or what kind of burner?
What is an Alchohol burner and how is it used?
An Alchol burner is a burner that uses alchol. A alchohol burner is a burner that burns alchohol.
Can you copy stuff on a CD without a burner?
It is not possible. Because you need that laser ray to burn the information into the cd.
Different kinds of burner?
Three types of laboratory burners are the Tirrill Burner, Bunsen Burner, and the Meker Burner. The Tirrill and Meker Burner have air and gas adjustments while the Bunsen Burner has only an air adjustment. Hope that helps.
What are burner used for?
A Bunsen burner is a gas burner. It is used to warm or heat the substances. Methane is used in this burner.
Labled Parts of the bunts and burner?
the different parts of a Bunsen burner are:
