Yes, it is possible
A "depth gauge micrometer" is used by engineers. A depth gauge micrometer is a precision instrument used to measure various depths of different items.
to cheak the diameter of something
Insturment used to measure the diameter of a string. A micrometer works just fine and is more accurate than a typical string guage which has calibrated slots.
A micrometer screw gauge is commonly known as a micrometer. This is a form of calipers used for measuring small dimensions. Screw gauge in extensively used in the engineering field for obtaining precision measurements. The article describes the principle and main parts of a basic micrometer screw gauge.
To measure the thickness of a thin piece of wire we have got the instrument called the wire gauge. The thickness of a thin piece of wire is measured in mm.
It is normally stamped on the barrel. If it is not, take it to a gunsmith. The smith can use a gauge or micrometer to measure the bore diameter, and tell you the right size ball and patch to use.
A meter rule is apropriate as it can measure up to unlimited meter while micrometer is suitable for diameter since it has a high degree of accuracy to small diameters in millimeters.
by measuring its diameter
With a micrometer. Usually in terms of gauge, 22 ga steel is .0299 in thick, the actual thickness for different materials varies aluminum of the same gauge is somewhat thinner than steel, galvanized steel is a little thicker than plain steel of the same gauge. A micrometer is one way to measure it, there are gauge plates that have slots for each size.
A micrometer , sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw used widely for precise measurement of small distances in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. Micrometers are similar in use to vernier calipers but are more precise although the modern digital caliper has blurred the distinction between them.A micrometer is also used to measure the diameter of very small objects that a vernier calliper can't measure for example a screw or a piece of wire.This instrument is mainly used by mechanics.
Calipers, of which there are many types, are used to measure thickness. The most common type is the Vernier Caliper.
With a Valve Spring Height Micrometer ----------------------------------------------------------------- If you don't have one of these tools you can also use what is called a snap gauge. Snap gauges are spring loaded and you can use it to measure the distance from the spring pad to the bottom of the retainer. Then you can measure the end to end distance of the snap gauge with either a dial caliper or a micrometer. Not as fast as the first solution but it is all we had for many years.