Yes, as long as the tile is only 1 layer, the floor is sound structurally, and you use a very high quality latex fortified thinset. If the old tile is cracking, those cracks will only transfer to the new.
The porcelain floor tiles are thicker, stronger and heavier then the ceramic wall tiles. This makes them more durable and long lasting then the ceramic tiles. The porcelain floor tiles are also subjected to constant and never ending wear and tear once laid down. The floor tiles are the ones which get the dirtiest in the least amount of time. Fortunately, the porcelain floor tiles are one of the easiest to clean. There are several methods of cleaning the porcelain floor tiles that involve the use of common household items.The porcelain floor tiles laid down in the kitchen can be easily cleaned with sodium borate or borax. Sodium Borate or Borax has been being widely used in the daily household chores for a while now. The Borax is used to remove the stains that appear on the floor tiles. Mix the Borax with lemon juice and stir the mixture until it becomes a smooth paste. Spread the paste on the stain and let it sit for a while to absorb the stain. Rub it off with a sponge or soft cloth to remove the stain as well as the paste.For the unglazed porcelain floor tiles, you can use the white vinegar solution. Make the solution by mixing 1/4th cup of white vinegar in approximately 8 liters of water. Damp a clean dry piece of cloth in the solution and use it to wipe all the dirty porcelain floor tiles. Let the cleanser soak for a while but don’t let it dry off. Scrub the stubborn stains with a soft bristle brush. Rinse the tiles with warm water.For the glazed porcelain floor tiles, begin with sweeping and vacuuming the dirt and debris from the floor. Use a clean piece of cloth damped in warm water to mop up the floor tiles. Make sure you don’t allow the moisture to puddle or pool over the tiles. Stuck dry soil pieces can be removed by using nylon bristle brush and stubborn stains can be removed by using the vinegar water mixture. Rinse again with warm water and dry the surface with clean dry towel.for more details you can visit www. ggcl. in
This depends on the type of floor. If lino flooring it should be taken up and replaced, but tiles can be difficult to remove. Tiles can have screed over them and a new floor placed over the top.
52 tiles (with a bit left over !)
That would depend on whether they are ceramic tiles or more vinyl tiles.
Rubber floor tiles are perfect for your workout space or bathroom floor, even your garage! Rubber floor tiles are excellent at muffling sound as well as being burn resistant. The tiles are also an environmentally friendly material, being made of recycled materials. And if that isn't enough to sell you on rubber floor tiles, they can also last from 15 to 30 years, talk about durability!
205.3125 tiles exactly OR 206 tiles, with a bit left over!
Not really. It's really hard to Paint over tiles with a good and lasting result.
mop and glow mopped over dirty floor, how to remove polish
Tiles used on floors tend to be thicker than wall tiles. Also, floor tiles are subjected to flexing as people walk over them. Therefore, if floor tiling a wooden floor, use a flexible cement adhesive and grout designed to give and take without cracking.
No. You can not. Indoor tiles are for indoor use only, they will not be able to endure the harsh climatic conditions. To make over your roof you desperately need to buy some Roof Tiles.
There are several advantages to using vinyl floor tiles over other materials. The most common are the ease of installation and replacement as well as the costs of purchasing the tiles themselves. There is also the particular look and feel of vinyl which is distinctive and more desirable to some over the more traditional textures.
You " CAN ", but it is not advisable!AnswerSand the painted area so that it is rough. Then the adhesive will work better.