0
It comes as a bearing and hub assembly.
Remove the rear wheel.
Remove the rear brake drum - may require a rap with a hammer to free up.
Remove the hub nut (1 3/16" or 1 1/4")
Hub assembly should slide off the axle.
Everything went well and it only took me about 30 minutes.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How hard is it to change the hubs on a 2003 dodge piuck up truck?
i would like to know how hard is it to change the front hubs on a dodge truck?
How hard is it to install a thermostat in 2002 Dodge Caravan?
not hard, follow top rad hose, to end take out two bolts pull hose back thermo in end of hose pop out of hose and don't for get change gascket
How do you change the fan blower motor on a 1998 Dodge Intrepid and how hard is it to change?
dont have a clue :)
Is it hard to change the oil pump in A 2002 corvette?
== ==
Is it hard to change a lock actuator in a 2002 mustang?
No.
How hard is it to change the rear struts on an 2000 dodge neon?
not hard at all,you will need a spring compressor
How hard is it to change the timing belt on a 1990 Dodge Colt 1.8 liter?
Very.
How hard of a job is to change a timing chain on a dodge intrepid 3.3 motor?
With the proper tools and information it is not a hard job.
How hard is it to change front wheel bearing on a 1995 Dakota?
should take about 2 hours if you are mechanically inclined
What to do if clutch in Ford Laser is stiff and hard to change gears?
Well you might be interested in checking the release bearing.
Why will not 2002 dodge will not go into park?
You might not be holding the brake pedal down hard enough or there may be a problem with that gear.
How hard is it to change front wheel bearing on Subaru Legacy sedan?
Very, very, very hard. You need all of the necessary tools to remove the steering knuckle and the right size press to press out the old bearing and install the new one.
