Well a lan address will contain an I.P address, it is usually asigned automatically from your router as well as a DNS, default gateway, and a subnet mask.
IP address of each computer on a LAN has to be different to avoid confusion.
we have assign two ip address in one lan card. first we put the lan card in DHCH mode Then highlight the alternative ip address block, give their manual ip address.
If you have a LAN you can allocate an IP address . If you have a internet connection your IP is usually allocated to you by your ISP
ifconfig <if device> inet <ip address>
The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.
It's false. Any networking device like a computer that is connected to a LAN has both a hardware address and an IP address.
The subnet mask must be the same for all devices in the same LAN segment. The IP addresses must be unique (different). Also, the default gateway address is usually the same for all devices in the same LAN segment.
Go into the computer that has the server and find the IP address, then go into your computer and after you log in select Multiplayer and select Direct Connect and enter in that IP address you found. You can also select Add server and do the same thing.
Network Address Translation (NAT) became helpful when IPv4 was running out of IP addresses to give. Using NAT in a Local Area Network (LAN) allows you to have one IP address given to you by your ISP (207.68.35.18 for example) which would be your WAN or Outside IP Address. If you needed to access a server inside your LAN when you are not connected to your LAN, using NAT would allow you to set up an IP address for that server and allow you to remotely use that server outside your LAN.
That would require your fridge to be connected to a LAN and would depend on the DHCP server for that LAN.
If your question is about ip address allocation by isp: whenever a user connect to the isp's network, from a specified range, its server allocates a dynamic ip address mostly or it can be static. if it is static, then the user will have the same ip address for a very long time (based on the deal). But if it is dynamic then it means it will change after some time or upon reconnect. now the if your question is about your LAN (at work etc): a computer again can have a fixed ip address assigned by the administrator or dhcp server can give your PC an ip address upon start. You may retain the same ip address for some days if such permission has been granted by the admin. IP addresses in LAN are normally not public addresses and therefore the range may not matter as long as it is in the same network segment.
In a LAN, setting up an ip address manually (which makes it a static ip address) ensures that the ip address won't be automatically changed on that machine. Makes it ideal for servers or administrative computers.