I will let you know after I have ran mine for a while I just put in a mix of castrol synthetic 5w50 and lucas transmission treatment in a k44 tuff-tork transmission (supposedly a sealed system, but it is really not sealed) on a JOHN DEERe L120.
Hi, your Eaton model 6 hydrostatic transmission requires straight 30 weight oil according to the manual.
Need to remove a quart of trans. fluid to add a quart of lucas trans conditioner. Does not have a drain plug.
no. just open the bottle and see the continents verses what your trans fluid looks like
Look for the transmission dip stick, remove it and pour stabalizer down tube.
the new volkswagens as i know it has hydrostatic transmissions no dipstick no plug ........if u see a low fluid trans light or trans service light is on jack up car and find where it is leaking from because it is busted
i found that the t190 uses hydrostatic hyd oil further research found that transmission fluids are hydrostatic which means you can use either a tractor trans oil or even a torque oil 50 also high temp hyd 100 is also used
NV 3500 trans..................Synchromesh transmission fluid or equivalent NV 4500 trans..................Syn-torq synthetic transmission fluid or equivalent ZF S6-650 trans...............Trans-Synd synthetic transmission fluid or equivalent
4l60e
Most of the ATF will remain in the trans cooler and lines unless you have the transmission force flushed by a trans shop.
transmission fluid is uaually added through the trans dipstick tube.
Auto transmission radiator has a cooling chamber for transmission fluid to circulate
there is no cable the trans is all electronic there will be a wiring harness to the trans but no cable.