0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which modulation scheme requires the least minimum bandwidth?
Suppressed carrier single sideband amplitude modulation - SCSSBAM.
What is the channel bandwidth for 2KHZ signal?
depends on type of modulation and other variables
Is modulated voice signal a baseband or broadband?
Neither.baseband refers to the original voice signal itselfbroadband refers to a form of wide bandwidth data transmission (e.g. internet traffic)the modulated voice signal consists of a carrier frequency and two sidebands, the bandwidth of the sidebands varies depending on the form of modulation used as well as the bandwidth of the original baseband signal, to reduce transmission power it is possible to eliminate the carrier frequency and to reduce overall bandwidth one of the sidebands may be partially suppressed or eliminated completely (but one sideband must always be fully retained)
The relationship of the bandwidth required for double-sideband emitted carrier AM to the bandwidth of the modulating signal of?
In Amplitude Modulation (AM), specifically in the case of Double Sideband Suppressed Carrier (DSB-SC) or Full Carrier (DSB-FC) AM, the required bandwidth is twice the bandwidth of the modulating signal. If the modulating signal has a bandwidth of B Hz, the bandwidth required for AM would be 2B Hz. This is because both the upper and lower sidebands of the carrier wave are utilized in the modulation process, each consuming bandwidth equivalent to the original signal.
What is the bandwidth of pulse position modulation?
probably (the carrier frequency +- the maximum frequency of the pulse train)/(the carrier frequency) but pulses have a lot of harmonics
Which cellular system uses the most bandwidth efficient modulation?
I think it is Frequency Modulation with Phase modulation which it the most bandwidth efficient
What determines the data rate that a modem can support?
The bandwidth of the transmission media The modulation encoding used
Which analog modulation scheme requires minimum transmitted power and minimum channel bandwidth?
ssb modulation scheme
Which modulation scheme requires the least minimum bandwidth?
Suppressed carrier single sideband amplitude modulation - SCSSBAM.
Why do you use sigma delta modulation instead of adaptive delta modulation?
if we need simple transmitter and receiver, if we need low bandwidth
What are the contrast of amplitude modulation to frequency modulation?
AM (Amplitude Modulation) has a smaller bandwidth and can have more stations available in any frequency range. AM is cheaper and can be transmitted over long distances. FM (Frequency Modulation) signals are prone to interference due to physical obstructions. The better sound quality is due to a much higher bandwidth, using FM.
What is the channel bandwidth for 2KHZ signal?
depends on type of modulation and other variables
Is modulated voice signal a baseband or broadband?
Neither.baseband refers to the original voice signal itselfbroadband refers to a form of wide bandwidth data transmission (e.g. internet traffic)the modulated voice signal consists of a carrier frequency and two sidebands, the bandwidth of the sidebands varies depending on the form of modulation used as well as the bandwidth of the original baseband signal, to reduce transmission power it is possible to eliminate the carrier frequency and to reduce overall bandwidth one of the sidebands may be partially suppressed or eliminated completely (but one sideband must always be fully retained)
The relationship of the bandwidth required for double-sideband emitted carrier AM to the bandwidth of the modulating signal of?
In Amplitude Modulation (AM), specifically in the case of Double Sideband Suppressed Carrier (DSB-SC) or Full Carrier (DSB-FC) AM, the required bandwidth is twice the bandwidth of the modulating signal. If the modulating signal has a bandwidth of B Hz, the bandwidth required for AM would be 2B Hz. This is because both the upper and lower sidebands of the carrier wave are utilized in the modulation process, each consuming bandwidth equivalent to the original signal.
How do you reduce congestion?
Increase the bandwidth.
Why amplitude modulation is used for video transmission?
IF we use frequency modulation for transmitting video signal this can cause phase shifting .and eyes can percieve this distortion effect easly . and requires more bandwidth to send the signal .Color levels are adjusted by amplitude in TV .So it s more logic to use Amplitude modulation .
What the difference between the single carrier and the multi-carrier modulation?
Multi-carrier modulation (MCM) is a method of transmitting data by splitting it into several components, and sending each of these components over separate carrier signals. The individual carriers have narrow bandwidth , but the composite signal can have broad bandwidth.
