i do not know
it is life
What is neutral point
In a combined magnetic field, a neutral point is a place where the magnetic field is zero
Another AnswerA motor represents a balanced three-phase load and, therefore, there is no neutral current, so there is no requirement for a neutral connection. Regulations prevent an earth being used as return, so the star point shouldn't be earthed either.
A person can find a neutral connection point is testing the continuity of every neutral connection. This technique will enable a person to find a bad connection point.
neutral point
Earthing point is where conductor is directly connected to ground and its potential is always zero. Neutral is a return path in single phase system and in three phase system Neutral point will have zero potential if all the loads are balanced in the system. In un balanced three phase system even neutral point will have some potential
The location of the neutral point in a system can be modified by changing the distribution of charges, adjusting the distances between charged objects, or altering the magnitudes of the charges themselves. For example, increasing the magnitude of one charge while decreasing another can shift the neutral point closer to the weaker charge. Additionally, rearranging the positions of the charges can also influence the neutral point's location. These adjustments affect the electric field and potential in the region, thereby altering where the neutral point is found.
Minaret. The Steeple can be a neutral term in architecture and can therefore apply to the minaret of a mosque, but steeple usually refers to the tower placed on the side of a church.
A seesaw or teeter-totter is an object that pivots on a central point (c2) and lacks a body in the traditional sense.
Neutral mean is zero potential and neutral wire it has been taken from the Distribution Transformer " Y " point (Xo). This point " Xo " is directly grounded through the dedicated grounding system.
Ground loop current, which is undesirable and every effort should be made to eliminate it.
-find the area(A) of the shape above the neutral axis (or above a particular point if given) - locate the centroid (y')of the shape relative to the neutral axis(or above point) using y' = ∑AiYi / ∑Ai - first moment of area = A*y' (or y' + distance of given point from neutral axis)