answersLogoWhite

0


Best Answer

Devices designed to run off a 9V battery are generally designed to work properly over the full operating voltage range of a 9V battery, from fully charged (typically up to 9.6 V) to nearly dead (typically 5.0 V).

Those devices work just as well at 8.4 VDC as they do at 9VDC.

Technically "8.4 VDC" is not exactly equal to "9 VDC", and so the current going into the device, the temperature of the device, the voltage at internal nodes of the device, etc. will all be slightly different.

Those slight differences are almost always irrelevant.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Is operating a device on 8.4 volts dc the same as on 9 volts dc?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

What is the gcd of 84 and 48?

The Greatest Common Divisor (GCD) for 84 48 is 12


How do you use a graphing calculator?

go to youtube.com and type same question in it's search box you will get your answer


How many amps draw is there on a half hp 3 phase electric motor?

5 hp equals 3730 watts, and on a 3 phase 480 v system the line voltage is 277, so the current times 277 times 3 equals 3730. The answer in theory is 4.5 amps. But you have to allow for 10% power-loss in the motor, and also the power factor, which could be 0.8. Therefore the current is probably 6 to 6½ amps. Maybe 10 amps on starting up. <<>> The formula you are looking for when amperage is desired when horsepower is shown is - I = HP x 746 / 1.73 x volts x % efficiency x power factor. A standard motor's efficiency between 5 to 100 HP is .84 to .91. A standard motor's power factor between 10 to 100 HP is .86 to .92. Amps = 5 x 746 = 3730/1.73 x 480 = 3730/830 x .84 x .84 = 3730/586 = 6.37 amps. Starting current will be 300% of the motors run current.


What size wire for a 3 phase 5 hp 460 volt motor?

At 600 volts the rule of thumb is one amp per horsepower. So a 20 HP motor would need 20 amp wire. The code book states that a 20 HP motor at 575 volts draws 22 amps. The conductor for a motor has to be 125% rating of the motors FLA (full load amps). 22 x 125% = 27.5 amps. A #10 copper conductor with a insulation factor of 60,75 or 90 degrees C is rated at 30 amps.


Can you use inverter 84w instead of inverter 168w?

No. If the load requires 168 W, then an 84 W inverter is not going to maintain the load.

Related questions

How much power does a device that operates on 12 volts and draws 7 amps consume?

84 watts


How many watts is 7 amps at twelve volts?

"Power (/Watts) = Current (/amps) * Potential Difference (/volts)" Therefore, power = 7 * 12 = 84 W


What is 79 percent of 84?

79% of 84 is the same as .79 x 84 If you need help with multiplication, you know where to ask.


What is the mean 52 and 84?

(52 + 84) ÷ 2 = 68Note: mean is the same as average.


How many inches in 84 inches?

Inches and inches are the same unit of measurement. Therefore, 84 inches is equal to 84 inches.


What is the greatest common factor of 72 84 and 96?

That's the same as the gcf of 84 and the remainder of the division of 7296 / 84.


What is the equation of the sum of a number and eleven times the same number is 84?

n + 11n = 84


How do you reset anti theft device on 1997 ETC so vehicle will start?

i have same problem with 84 eldorado oftem, i disconect positive wire from the battery and wait a few minutes it should reset itself.


What is 0.4 percent of 84?

0.4% is the same as 0.004 and 0.004*84 = 0.336 or 42/125 simplified


What is the product of the greatest common factor and the least common multiple of 84 90?

The same as the product of 84 and 90.


What is the same denominator of 4 21 7?

84


What are the special features of the TI 83 plus?

Some of the features of the TI-83 Plus, are: upgradable operating system and software; preloaded apps; compatible with TI-84 Plus and TI-84 Plus Silver Edition.