Yes, clear coat peeling is a problem on a lot of GM cars in the 80's and 90's. Some claim they had a problem with their primer and others believe it was because the EPA mandated certain chemicals be removed from the paint.
Not much you can do but strip it and repaint.
top clear coat
yes, only on the driver's side t-top
take the car to the dealer and demand a new paint job, this is due to lack of a good clear coat during the painting of the car.
My nails ARE NOT PEELING OFF!! MAYBE YOURS ARE!!
The clear coat that would protect a quadding helmet is the Maxima SC1 Clear Coat.
If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
Clear coat is applied over a base color for the gloss
Area will have to be sanded to get rid of the spots which will probably get into the paint. If you are careful 320 grit paper to even the surface out and reapply clear coat. keep in mind if you get into the paint it will have to be srayed color before clear is applied. Clear coat is not that bad cost wise figyre the clear, the activator about 2 Qts for what you are doing about 100.00 to 140.00 for a good clear. Where you shoot it is the problem which could be the expensive part of the deal.
If peeling you can scrape it off with a razor blade. Sand the remaining paint with 400 grit. Sand/feather the edges that don't scrape off. "Clean" and add 3 coats (progressively more each time) of Clear. There is an item sold in spray cans called "Peel"at paint shops but it will remove the paint too.
do you use hardner or reducer in clear coat car paint?