Yes [[+ -]l
The positive end of a battery goes to the positive end of the terminal. In retro spec, the negative end of a battery goes to the negative end of the terminal.
The positive terminal of a battery is typically located at the end with a plus sign () symbol.
it talls u
The flat smooth end is negative. The end with the small bump in the center is positive.
Look for a plus symbol on your battery. The plus sign, or +, indicates the positive terminal. On AA, AAA, C, and D batteries, the positive end should be slightly raised. Shop Energizer AAA Batteries set contains 16 pieces from Stabeto online store at best price. Perfectly stored Energizer AAA Batteries are now available in the Stabeto store. For all your daily electronics, these Energizer Alkaline Power Batteries have long-lasting Power. They still offer a better tolerance to leaks at a lower rate than luxury equivalents. For the expertise you expect at a high value, power your machines with these long-lasting and powerful Alkaline Power batteries from Energizer.
Its an anode
When jumping two automotive batteries, connect the positive () cable to the positive terminal of the dead battery and the other end to the positive terminal of the live battery. Then, connect the negative (-) cable to the negative terminal of the live battery and the other end to a metal surface on the car with the dead battery, away from the battery.
The top of a battery is called a carbon rod, which is on the positive terminal.
When jumping a car battery, you should connect the positive (red) jumper cable first. Attach one end to the positive terminal of the dead battery and the other end to the positive terminal of the good battery. After that, connect the negative (black) jumper cable to the negative terminal of the good battery, and then attach the other end to an unpainted metal surface on the dead car, away from the battery. This reduces the risk of sparks near the battery.
Connect positive to positive post (red) on the battery and connect the negative to a place on the engine away from the battery.
Follow the positive battery cable from the battery, the other end is connected to the starter.
Hook up the jumper cables in this order: (1,2,3,4) (1) One end of positive cable to positive post of GOOD battery (2) Opposite end of positive cable to positive post of DEAD/LOW battery of disabled vehicle (3) One end of negative cable to negative post of GOOD battery (4) Opposite end of negative cable to GROUND on disabled vehicle (a good ground is preferred over the negative post, however, the cable can also be hooked to the the battery post). To remove the jumper cables after starting, reverse the order (4,3,2,1)