Yes. The bigger the cross section, the lower the resistance.
If two pieces of wire are made of the same material and have the same length but different resistance, then the one with the greater cross section area has the lower resistance.
If you slice a wire cleanly and then look at the cut end, you see a little circle at the end. The area of that circle is the "cross-sectional area" of the wire. The larger that area is, the lower the DC resistance of the wire is.
No, a smaller diameter wire has a higher resistance. The 0.01 mm wire will have 1/100 the cross-sectional area of the 0.1 mm diameter wire, therefore the resistance will be 100 times as high.
Because a higher resistance would have resulted in more heat loss, but the higher is he current, the more energy is lost to heat. Therefore, a lower resistance would release more heat.AnswerPower is equal to voltage squared divided by resistance. So, for a given voltage, the lower the resistance the higherthe power.
The resistance of a human body changes, you can divide it in 3 groups: dry body, semi-wet body (sweat,...) and wet body (in a swimming pool,...) the more wet the body becomes, the lower the resistance.
resistance for electricicty
Yes. The bigger the cross section, the lower the resistance.
Wet things are provide less resistance to electricity
human body resistance to electricity when skin is wet is 1,000 ohm and when skin is dry its resistance is 100ohm
If two pieces of wire are made of the same material and have the same length but different resistance, then the one with the greater cross section area has the lower resistance.
Since resistance is inversely-proportional to cross sectional area, the lower the cross-sectional area, the higher the resistance. So ALL types of wire exhibit this behaviour!
No. The larger the conductor the lower the resistance and the higher the ampacity.
A thick wire has its cross section area more than that of the thin one .Since the resistance of a material is inversely proportional to its resistance, resistance of thick wire is less compared to.[as cross section area increases the no electrons drifted increases].this applies only to OHMICdevices.
is garelochhead in argyll scotland a wet area
Higher wetness lower resistance.
The area of Wet Moor is 4,910,000.0 square meters.