Steel wool is a Mixture-Mechanical
1. Add water and stir; the sodium chlorode is dissolved. 2. Filter the material; NaCl remain in solution, sand and steel wool on the filter. 3. Dry the solid material. 5. Try to extract the steel wool with an electromagnet.
thin steel wool
mixture
Copper is deposed on the steel wool.
Steel is not an element, but is a mixture we call an alloy. It is mostly iron with a bit of carbon in it; these are the primary ingredients. But it may also contain other elements to give it different characteristics. The carbon is in it at about one percent (ball park), while if we add something over about 11% chromium, we'll get stainless steel.
Steel wool is a mixture.
steel is made from a mixture of iron and carbon so yes, steel wool definitely has iron in it
1. Add water and stir; the sodium chlorode is dissolved. 2. Filter the material; NaCl remain in solution, sand and steel wool on the filter. 3. Dry the solid material. 5. Try to extract the steel wool with an electromagnet.
When the impurities are in a low concentration steel can be considered a solid solution; otherwise is a mixture.
IF THE COPPER SULFATE DISSOLVES IN WATER, HAS A BLUE COLOR. WHEN STEEL WOOL IS MIXED WITH COPPER SULFATE,, THE STEEL WOOL DISSAPEARS, A BROWNISH SOLID FORMS, AND THE COLOR OF THE SOLUTION CHANGES FROM BLUE TO GREEN.Copper is produced.
steel wool is steel made from wool, so it would be neither
thin steel wool
the wool does not rust
No, stainless steel is a homogeneous mixture of iron and chromium.YES, actually, stainless steel is a compound, because compounds are HOMOGENEOUS forms of matter. If it were a mixture, by definition, it would be a HETEROGENEOUS form of matter.
The steel wool gets wet. If you take the steel wool out (into the air) again it will rust.
mixture
Steel wool