A: while a step can be of both polarity but it is a level change and it is DC LEVELS
This DC voltage is called the DC offset. Any decent signal generator will be able to add DC offset to the signal it generates. If you don't have one, simply connect a DC voltage to your signal.
It is called ( pulsed DC ).
You need alternating current for a transformer, for DC you would have to interrupt the power supply to make it effectively DC pulses.
theperpose of a power supply is to step up or step down an ac voltage to a desired dc value
seasning
This DC voltage is called the DC offset. Any decent signal generator will be able to add DC offset to the signal it generates. If you don't have one, simply connect a DC voltage to your signal.
It is called ( pulsed DC ).
ac
we use dc supply for amplifcation and dc have no frequincy. we amplify just signal curent or signal voltage.
The Amplification is much high during acmode because of transister conducts boththe Half cycles.But in DC the transister conducts only in positive half cycles.So the Amplification of AC signal greater than DC signal.
can ou step down 36 volts dc to 12 volt dc using batteries
The operation of a rectifier is to conver a AC signal to a pulsating DC signal
chopper use a ststeing perpose..... dc means direct current that is low voltage
bounded signal
DC current
signal which remains constant over a certian interval of time.e.g dc voltage
You need alternating current for a transformer, for DC you would have to interrupt the power supply to make it effectively DC pulses.