neither. DC locks the rotor of a stepper stationary, pulses applied to a stepper's windings in one order advances it while in the opposite order reverses it. steppers typically have 4 to 6 windings.
DC Motor works on DC source and AC motor works on AC source
DC motors use PWM (pulse width modulation), which can easily increase or decrease the power to the motor, thereby increasing or decreasing the motor speed by modulating the width of the pulse. Stepper motors have fixed frequencies, thereby having fixed motor speeds. As a result, the speed of the stepper motor cannot be controlled when the load is increased.
It depends on the motor. The fan is driven by an electric motor, and it can use a dc motor (as in a car) or an ac motor (as in a house). They are not interchangeable.
use a inverter to change dc to ac or couple it to a ac motor making it a motor generator. Comment: AC motors cannot run on DC since their principle of operation based on induction. There's an exception,however, and thats for Universal Series motor which can run on either AC or DC.
motor will not rotate
stepper motor :- motor used for controlling direction of movement of robotic arm dc motor :- motor used in cellphones as vibrators ac motor :- motor used in textile machinery
neither. DC locks the rotor of a stepper stationary, pulses applied to a stepper's windings in one order advances it while in the opposite order reverses it. steppers typically have 4 to 6 windings.
A stepper motor is more easier to maintain than a normal ac motor. Ac motor is a seal motor under pressure. A stepper can easliy be open and the interwheels can be fixed and cleaned.
A normal motor run at a fixed speed depending on: AC motors: Voltage and frequency (Hetz) and number of poles DC Motors: Armature voltage Stepper motors speed depend on the drive pulse frequency.
stepper motor No. it is not a stepper. It is a Brushless DC (BLDC) motor. See related link for more information on this motor.
A stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps. It moves one step at a time.
DC Motor works on DC source and AC motor works on AC source
AC stands for alternating current, and DC is direct current. A motor is a device that uses electrical energy to spin. An AC motor uses AC voltage, and a DC motor uses DC voltage. http://ezinearticles.com/?The-Difference-Between-AC-and-DC-Electric-Motors&id=193767
DC motors use PWM (pulse width modulation), which can easily increase or decrease the power to the motor, thereby increasing or decreasing the motor speed by modulating the width of the pulse. Stepper motors have fixed frequencies, thereby having fixed motor speeds. As a result, the speed of the stepper motor cannot be controlled when the load is increased.
A dc series motor can work on dc and ac because dc motors are totally reversible.
ac
if you power an ac motor with dc or a dc motor with ac you will likely start smelling smoke and the motor will be damaged. If the motor is marked "3-phase", "shaded pole", or "induction" it is an ac motor! BTW, there are ac/dc motors that will run on both, they are wound very much like dc motors but a bit differently.