0
What else can I help you with?
How do you use electric power in inductive load?
The actual energy consumed in load is inductive load
What will happen when diesel genertor set run on more inductive load?
There is no problem using a generator to run more inductive load so long as the generator capacity can supply the needed power to the inductive loads. The inductive loads should not be switched on at the same time but there should be a little delay before another load is switched ON as inductive loads draw more power at start ON. The power factor of the inductive loads also affect the generator, hence for safe operation a power factor that is approaching 1 is desirable. Ogu Reginald Ekene
Why pure inductive load is used to for finding zero power factor instead of using pure inductive load?
The question makes no sense. It asks why a pure inductive load is used ... instead of a pure inductive load. Please restate the question.
What is the name of a UK power station?
Battersea power station. Hartlepool power station
What is zero power factor?
A power factor equal to zero means that the load is purely inductive or purely capacitive, and no power is available to do work, because all of the generated power is going into charging the electric field in the capacitor, or the magnetic field (if an inductive load).
What are the properties of inductive load?
inductive load does not allow the current to become zero eve though the supply source get removed . inductive load reduce the power factor . they does not allow sudden change in current in the load ...
What is the main reason for Low Power Factor?
inductive/lagging load
Ac inductive loads are rated in?
They are usually rated by their power factor. With 100 volts at 1 amp the load uses 100 watts maximum, in general it would be 100 watts times the power-factor.For example a small induction motor might have a PF of 0.7.AnswerIn practise, there are very few purely-inductive loads. Most are resistive-inductive, and rated according to their apparent power expressed in volt amperes. A purely-inductive load would be rated according to its reactive power, expressed in reactive volt amperes. No load is ever 'rated' according to its power factor.
Name of power station in india?
There are three power stations in India; Tarapur Atomic Power Station, Rajastan Atomic Power Station and Kakrapar Atomic Power Station.
What is the active power consumed by pure inductive reactance?
The active power of an inductor is zero. As we know, the active power is the result of product of supply voltage and in-phase component of load current. But the load current in pure inductive load lags supply voltage by 90 degrees. So there is no component of load current that is in-phase with the supply voltage. Therefore, the active power in inductive reactance is zero.
What is commercial power factor?
Electrical inductive motors, transformers and magnetic ballasts bring real power that are measured in kilowats and reactive power (measured in kilovolt-amperes reactive, kvar). Real power genrates "productive" work. Reactive power does the the magnetic field required for inductive devices to operate.
How is cruachan hydroelectric power station different to a normal hydroelectric power station?
Cruachan Power Station is a storage hydro-electric power station whereas a Normal Hydroelectric power station is produced and then used, no storage needed.
