Nobody. The .17 HMR (for Hornady Magnum Rimfire), is a rimfire cartridge, not a center fire cartridge.Anschutz, CZ-USA, Henry, Weatherby, Ruger, Remington, Marlin, Browning, Savage, and Crickett are among the list of manufacturers who manufactures .17HMR rifles, but, as with the cartridge, they are all rimfire rifles.
If you look at the bolt face, a center fire rifle will have the firing pin located in the center of the bolt. A rimfire rifle will have the firing pin located on the outside edge of the bolt.
Ruger is one.
no
If the firing pin is in the center of the bolt it is center-fire. If the firing pin is at the edge of the bolt it is rimfire. The base of a center-fire cartridge will have a small circle in the middle made of different metal than the case. The base of a rimfire cartrige will be flat, maybe with a trademark engraved on it.
All firearms that are in caliber .22 Long Rifle (LR) or 22 Long or 22 Short are rimfires. If you look at the face of the bolt, you can see the firing pin. If it is in the very center of the bolt face, it is center fire. If at the edge of the face, it is rimfire.
Depends on the rifle- bolt action, semi-auto, rimfire or center fire. The only real answer is take it to a gunsmith. Sorry-
http://www.wisnersinc.com/ They will have what you need!
In general, no. The cartridges will have differing shapes and sizes, a a rim fire firing pin strikes the rear edge of the cartridge, where a center fire firing pin strikes the center of the rear of the cartridge. HOWEVER, in past years a very few firearms have been made with a changable firing pin that could fire rimfire OR centerfire ammuntion of the same caliber.
The model 1890 Winchester was only chambered in .22 short,22long,22 long rifle,or 22WRF calibers which were all rimfire calibers.
no it does not
It means the primer is located at the rear center of the cartridge, unlike rimfire, which has the primer in the rim.