Want this question answered?
That would depend on what problems you are having, or what codes you pulled. But I would say the egr valve would be next if it is egr related problems based on what you changed already.
Yes no problems, you have to make up a blanking plate to bypass the egr
There are seven steps on how to replace the EGR valve in a 91 Chevy Corsica. Some of the step-by-step instructions are disconnect the car battery, unhook the air supply hose, and remove the EGR mounting mounting bolts with a socket wrench.
If you have less than 80,000 on it read below. Occasional problems on this vehicle are failures of the Exhaust Gas Recirculation (EGR) Valve Passages and the EGR valve (3.0L V6 engine only). Honda has extended the warranty on problems related to the EGR System to 8 years or 80,000 miles.
This has been answered and do a seach and it will take you step by step and word it just as you placed your question about it!
it will cause pinging running your combustion hotter
I don't have the pictures but found some by googleing Camry egr valve. You can start there and that might be enough to get you going.
Underneath the airbox in the engine compartment. Go to www.autozone.com and look up the EGR valve. They have pictures of it so you know what you are looking for. Hope this helps!
A bad EGR valve in a 2000 Saturn can have several symptoms. The EGR valve can cause misfires, the valve can cause vacuum leak style problems. There could also be an engine knock.
There is no pressure sensor. The EGR valve is located on the head next to the battery. Cleaning it is usuallu the first step if there are any SES codes associated with the valve.
Depends on the year. Here is a site that has pictures of an EGR valve for a 1997 - 1999 Suburban: http://www.racepages.com/products/?D=gmc+suburban+egr+valve&Nty=1&Ntx=mode+matchallpartial&Ntk=Main&N=4294950670+4294963366+9926&Dx=mode+matchallpartial&Ntt=gmc+suburban+egr+valve Go to www.racepages.com and search for an EGR valve for your year rig.
See related link.