Dimmer.
the view will be brighter under low power magnification...
when viewing objects under high-power, the field of view is smaller, but you are able to see more details.
2
A little. First off, most modern dimmer switches aren't rheostats. Those have been supplanted by TRIACs (triode for AC), and later, IGBTs (insulated gate bipolar transistors). For both of these, their mode of action is to change the duty cycle of the AC wave (duty cycle is time on versus cycle time) such that less power per cycle is put through the bulb. This is more efficient than a rheostat, in that, there isnt as much resistive loss across the dimmer. The resistive loss is where the "a little" comes in. For all three types, a small amount of the power put through the dimmer is dissipated as heat - however, this is significantly less than the reduction in output power to the bulb, whatever the type. An ideal dimmer would have 100% efficiency - that is, for a given setting, it would dissipate no heat, and the bulb would be the only thing on the circuit consuming power. However, no component is ideal, and modern dimmers typically consume under 1% of their power throughput (so if it's passing a total of 1W, it'll consume less than 10 milliWatts).
In reference to microscopy, the field of view (or FOV) describes the area you can see through the microscope, especially light microscopes. Under low power, it is about 1800 micro metres and at high power, it is around 450 micro meters (but this depends A LOT on the microscope you are using).
the view will be brighter under low power magnification...
when viewing objects under high-power, the field of view is smaller, but you are able to see more details.
when viewing objects under high-power, the field of view is smaller, but you are able to see more details.
low
when viewing objects under high-power, the field of view is smaller, but you are able to see more details.
when viewing objects under high-power, the field of view is smaller, but you are able to see more details.
2
Low power. (10X)
there is at the passenger side under the dashboard, there are 3 pieces, a flasher, horn relay and the big box is the dimmer switch.
Try "curves" (under color - under levels).
Depth of field decreases from low to high. This means what you see under the microscope is blurry. If both objects are not blurry, this means you have high depth-of-field.
You can see less under high power because it focuses on a smaller part of the specimen, but in more detail than low power.