I dont know, but you can just check by researching.
HOPE THI
HELPED!
It is the reverse.
Actually, the image doesn't form in the microscope. The image forms on your retinas. The microscope focuses light in such a way that it comes together correctly on your retinas.
Its a Light Microscope! (=
In tool makers microscope, we will see the magnified object. In profile projector, we will see the magnified image of the object. Principle of operation of both is more or less same.
When an image is viewed through a microscope it is inverted, meaning turned upside down and it is also shown mirror image, meaning from left to right.
A light microscope is a simple microscope that magnifies light that it collects and spread onto a screen digitally or optically. Electron microscopes is a microscope that fire electrons onto a object then it is bounced back to form an image. It enlarges the image when it is bounced back. It is fired consistently to receive a constant image. It is viewed with a electronic screen. When the electron is fired it creates light which bounces back as well. It can magnify much bigger than a optical microscope.
microscope
It is specially set up to produced a magnified image of an object placed before its objective lens.
Light waves are bent as they pass through glass - parallel light from the object is focused on a small area (so the image is larger).
microscope consists of two lens called eye lens and objective lens. objective lens is lens kept behind object and eye lens is keep on the top of microscope .i.e. on the place through which we look. firstly the object is placed behind the objective of microscope which is turned into virtual, erect and magnified image. later this image is thought to be the object for the eye lens and this objects forms real, inverted and magnified image.
A light microscope creates a magnified image through a series of lenses. The light rays reflected from the viewed abject, pass through these many lenses and form an enlarged picture of the object. It is able to show the fine details of the object that most people are studying or looking for.
microscope
The microscope you are using is probably old, and it has an odd number of convex lenses between the object and your eye. in addition to enlarging (or reducing) an image, an optical convex lense also inverts the image. If you were to invert the inverted image again, using another lense, then the resulting image will appear upright. So a microscpope with three lenses (most likely the number of lenses in the microscope you are using) inverts the image three times, resulting in an upside-down image. A microscope with four lenses shows an upgright image. That is why modern microscope manufacturers use an even number of lenses in a microscope (and in binoculars).
The objective lens focuses and magnifies the object and transmits this image into the body tube of the microscope.
No, clarity of an image is resolution.
The answer you are looking for is called a dissecting or stereo microscope. These provide a lower magnification range in comparison to compound microscopes and they use two sets of lenses, the eyepiece and the objective lenses. these then provide a 3D image.
A Scanning Electron Microscope can view a 3-D image of an object.
Henrey's world