Want this question answered?
A right-hand thread is a fastener, for example a screw, which is fastened by winding it (such as with a screwdriver) in a clockwise direction.
A screw operates by a raised ledge which proceeds up the shaft of the screw in a spiral. This raised ledge is called the thread of the screw. Since the spiral can either proceed in a clockwise or counterclockwise manner, we distinguish between right-hand thread screws (counterclockwise as viewed from above) and left-hand thread screws (clockwise).
Right hand thread
It is a right hand thread.
Right hand thread
Regular right hand thread to my knowledge, lefty-loosey, righty-tighty.
Worked it out, right hand thread, clockwise to undo it.
Right hand thread
A right hand thread is one where a nut moves in the direction of the way the thumb points on your right hand if the nut is turned in the direction of the curl of the fingers (or the direction the fingers point) of your right hand. The same is true for a left hand thread using the left hand, of course.
it means the thread on the right hand side of the tire
More than likely it is right hand thread.
A thread may be either right-hand or left-hand. A right-hand thread on an external member advances into an internal thread when turned clockwise; a left-hand thread advances when turned counterclockwise. If a single helical groove is cut or formed on a cylinder, it is called a single-thread screw. Should the helix angle be increased sufficiently for a second thread to be cut between the grooves of the first thread, a double thread will be formed on the screw. Double, triple, and even quadruple threads are used whenever a rapid advance is desired, as on valves.Pitch and major diameter designate a thread. Lead is the distance advanced parallel to the axis when the screw is turned one revolution. For a single thread, lead is equal to the pitch; for a double thread, lead is twice the pitch. For a straight thread, the pitch diameter is the diameter of an imaginary coaxial cylinder that would cut the thread forms at a height where the width of the thread and groove would be equal.Thread forms have been developed to satisfy particular requirements. Where strength is required for the transmission of power and motion, a thread having faces that are more nearly perpendicular to the axis is preferred. These threads, with their strong thread sections, transmit power nearly parallel to the axis of the screw. (Sci-Tech Encyclopedia)For the source and more detailed information concerning your request, click on the related links section (Answers.com) indicated directly below this answer section.