If wired correctly the red wire will be hot, but any wire can be hot regardless of colour if done incorrectly.
Connect the black wire to the incoming hot wire and the red wire to the out going load.
No, there are different occasions when the red of a three wire cable gets used as a hot wire. There also times when the white wire gets used as a hot but has to be re identified as a hot with marking tape. When wiring baseboard heaters the cable used is red and black with no white wire in the set.
Black red and yellow is three-phase. there is no neutral.
Where there is a red wire involved that usually indicates some type of special switching arrangement or more likely a 240 Volt circuit. In this case there will be 240 volts across the red and black and they will both be hot. Normally for 120 Volts the black is hot, the white is common and the bare wire is ground.
If wired correctly the red wire will be hot, but any wire can be hot regardless of colour if done incorrectly.
Connect the black wire to the incoming hot wire and the red wire to the out going load.
Red Hot TV - Canada - was created in 2003.
No Red is positive and it is hot
normally the blue and red wires are hot white is standaed for nutral,
Red is hot Green is ground White is neutral
red is usually the hot wire.
No, there are different occasions when the red of a three wire cable gets used as a hot wire. There also times when the white wire gets used as a hot but has to be re identified as a hot with marking tape. When wiring baseboard heaters the cable used is red and black with no white wire in the set.
Black red and yellow is three-phase. there is no neutral.
Where there is a red wire involved that usually indicates some type of special switching arrangement or more likely a 240 Volt circuit. In this case there will be 240 volts across the red and black and they will both be hot. Normally for 120 Volts the black is hot, the white is common and the bare wire is ground.
red
red