The switch is located just above the brake pedal.
depends on which break pads.
check brake light fuse and brake light switch on pedal
The fuel pump shut off ( inertia switch ) is located in the front passenger footwell behind the kick panel on a 1999 Ford Ranger
under the brake booster
According to the 1999 Ford Ranger Owner Guide : The fuel pump inertia switch is in the front passenger's footwell , behind the kick panel
You have a 1999 Ford Ranger 3.0.
inside the door panel
For a 1993 Ford Ranger : ( DOT 3 brake fluid )
How do you remove the flywheel on a 1999 ford ranger
on the ford ranger pickup truck, it is under the passenger side dash
What size is the steel brake line tubing on a 1994 Ford Ranger
check brake light switch
The brake light switch is located near the top of the brake pedal. When the pedal is depressed the switch is activated and sends current to the brake lights. To access the switch, the under dash panel needs to be removed.
Most brake light switches are mounted to the brake pedal up towards the dash board
You could have either 9 inch or 10 inch , depending on the brake drum size
is there a recall on the timing belt on a 1999 ford ranger?
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
What should the thickness be on the front brake lining for ford ranger 2010
THAT IS USUALLY AN INDICATION OF A BURNED BRAKE LIGHT SWITCH. SWITCH IS USUALLY LOCATED ON THE BRAKE PEDAL ITSELF. DISCONECTED AND IF THE LIGHTS GO OUT YOU HAVE FOUND YOUR PROBLEM , SIMPLY REPLACE IT.
brake light switch is above the brake pedal
it could be a combination of things like a blown fuse or a bad bulb or your brake switch on the top of your brake pedal could be bad, check and replace if you have to.
For a 1995 Ford Ranger ( in North America ) ( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A )
On my 94 ranger its on the break pedal (towards the top) its pretty easy to replace I have changed 3 times in 12 years