There is a difference in the two. Suspension grease will be thinner and the bearing grease would be much thicker in density .
You grease the suspension on a 2005 Chevy Trailblazer by attaching a grease gun to the grease fittings. Grease is then injected into the fitting until it leaks back out.
The grease
If you uave a can of grease,you can put the bearing down in that and work it around in the grease.Then make sure there is enough grease in the hub,where the bearing came out of.
No, no grease fitting.
lithium grease or bearing grease
to trap the lubrication and holds it in suspension
You can if you take the bearing completely apart. There is no nipple
The factory parts are all sealed and are not grease able.
when installing them always pack the bearings with grease, if the bearing has been run without grease and making a roaring sound it is probably bad and needs replaced
No. That is a factory sealed bearing.
The hub bearing needs to be properly lubricated. Having access to a grease gun helps. Use the grease gun and place some grease in the bearing. These will help keep it lubricated and functional.
Most likely a sealed suspension system with no grease fittings if original