0
What else can I help you with?
How do you work out x dimensions?
measure the length of the fitting first. Then insert pipe into fitting and mark a line on pipe. measure that bit of pipe. deduct off the length of fitting and half it to give you your x dimension
What is the cut off measurement of a 90 degree pipe fitting?
pipe size(inch)x38.1
Can you reduce an 8 inch stove pipe to a 6 inch stove pipe effectively?
Yes, you can reduce an 8-inch stove pipe to a 6-inch stove pipe effectively using a proper reducer fitting designed for this purpose. However, it's important to ensure that the reduction is compliant with local building codes and the manufacturer's specifications for your stove. Reducing the size can affect the draft and efficiency, so it's advisable to consult a professional or refer to installation guidelines to ensure optimal performance and safety.
What are the parts of a stove pipe?
I think there are two types of stove pipes. 1) Double Wall Stove Pipe 2) Single Wall Stove Pipe
How can I remove a PVC pipe fitting after it has been glued?
To remove a PVC pipe fitting that has been glued, you can use a heat gun to soften the adhesive and then twist and pull the fitting off. Be sure to wear protective gear and work carefully to avoid damaging the pipe.
What does tos stand for in pipe fitting?
what are some pipe fitting abb
UPVC Pipe Fitting Mould?
PVC Pipe Fitting Mould
How can I properly connect a stove pipe to a wood stove?
To properly connect a stove pipe to a wood stove, ensure the pipe is the correct size and material for your stove, use high-temperature sealant at the joints, and secure the pipe to the stove with screws or clamps. Follow the manufacturer's instructions for a safe and effective connection.
What are the parts of a stove?
I think there are two types of stove pipes. 1) Double Wall Stove Pipe 2) Single Wall Stove Pipe
How can I safely remove a PVC fitting from a pipe?
To safely remove a PVC fitting from a pipe, you can use a heat gun to soften the PVC material and then gently twist and pull the fitting off. Be sure to wear protective gloves and goggles to prevent burns or injuries.
How can I properly install an MFL fitting for my gas line?
To properly install an MFL fitting for your gas line, follow these steps: Turn off the gas supply. Clean the pipe ends and the fitting. Apply pipe thread sealant to the male threads of the fitting. Connect the fitting to the pipe, ensuring it is tight. Use a wrench to secure the fitting in place. Turn on the gas supply and check for leaks using a soapy water solution. If there are no leaks, your MFL fitting is properly installed.
What is meant by fitting allowance?
The fitting allowance is the difference: (pipe end to fitting center measurement) minus (pipe end to end measurement). It is the amount of length the fitting adds to the end of the pipe (to get the center of the turn).
