answersLogoWhite

0


Best Answer

The ignition switch should be in the locked position. The fuel line should be under pressure, wrap it with a towel so that when you loosen the connection it will not spray fuel everywhere, particularly on you.

User Avatar

Wiki User

โˆ™ 2013-06-18 18:40:37
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: Is there a fuse or switch you should turn off before removing a fuel filter for a 1988 Chevy celebrity?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the fuel filter on a 1984 Chevy Celebrity?

2.8L 2BL 1984 Chevy Celebrity The Fuel Fiter should be located in the coupling between the fuel line and the carburator.


How do you replace the cabin air filter in your 2003 TL type s?

you should be able to access the cabin air filter by removing your glove box, and a clip should be holding it in place. remove the clip and the filter should come right out.


Should a fuel pump be placed before the filter or after the filter?

Only a larger filter (100 micron) should be placed before the pump or suction side. A smaller finer filter should go between the pump and the carb. Too small of a filter before the pump can lead to inadequate fuel flow rate to the pump.


Where should a fuel filter be before or after fuel pump?

AFTER.


What is the first step you should do before removing your mask?

loosen the neck straps


What should you connect to the vehicle before removing the negative battey cable?

Nothing.


What is the first thing you should do before removing the mask?

loosen the neck straps


Should miley have a celebrity?

Miley is a celebrity


What should you do when a celebrity wants to date you but you're not a celebrity?

date the celebrity


When should 2002 gmc safari has 75300mi should you do a transmission flush now?

NEVER flush a transmission with an internal replaceable filter. The pan should be dropped, the gasket removed and replaced and the filter carefully removed to replace (do NOT leave the filter neck seal in the valve body chamber when removing the original filter). You can flush the rest of the fluid with the new filter installed, but why?


Should you have to bleed fuel lines before you change your fuel filter?

no that is not necesary you only put a piece of rubber to prove it works before you put the filter. If this work then you put the filter


What should be removed first before removing top cover?

remove guy ropes

People also asked