According to NFPA 211 (The national standard for fireplaces) Chimneys SHALL stand 3' above the roofline AND 2' above anything within 10' (This is the 3-2-10 rule)
ASME having standards from A to Z .Y is the standard series for design series.
It is ASME standard for piping
Placing the chimney at a height - directs the waste gasses etc away from people - and allows the wind to disperse the smoke.
It is an ASME Standard for Carbon stell forgings, rounds
Simply, A105 is an ASTM standard for a ratedsteel where SA105 is the ASME standard for (nominally the same) rated steel. Basically, they are the same, although SA105 has additional applications beyond A105 according to ASME standards.
What is the minimum height required for chimney of 100 KVA DG Set which is kept in
The PN16 flange is equivalent to either the ASME 150 or 300. The PN is related to Nominal Pressure and the ASME is the standard for the American Society of Mechanical Engineers.
The ASME B31.3 code is not an exam but a standard for process piping design. However, if an exam is based on the content of ASME B31.3, it is typically closed book to assess the candidate's knowledge and understanding of the code without reference materials.
Ratio shadow:real height for gate = 12ft:5ft = 2.4 So ratio for chimney = 28:real height = 2.4 Height of chimney = 28/2.4 = 11.66... ft
OSHA has the legal authority to enforce only those standards it issues. It has no authority to enforce ASME Standards, unless they have been incorporated by reference in a Standard issued by OSHA.
measuring tape
350 m.