0
What else can I help you with?
What is commonly used to position a camshaft gear on a camshaft?
Most engines use a key-way. Need more info.
What would make the camshaft on your 350 Chevy move in and out when you turn the distributor?
That is because of the way the gear on the distributor and camshaft is tapered. If you turn it the other way it will pull the camshaft towards the rear of the engine. That is all normal. When you put it all together it won't do that.
How do you hide your user name on clubpenguin?
There is no way to hide your user name on clubpenguin.
What are the ratings and certificates for Chilly's Hide-a-Way - 1971?
Chilly's Hide-a-Way - 1971 is rated/received certificates of: USA:G
How do you adjust the idle on a Honda Fourtrax?
under the carb you will see a little black knob. turn it which ever way until the idle gets to the way you want it
Camshaft position sensor location 4.6 mercury couger?
The camshaft position sensor is on the front of the engine block. It is on the right front about half way up.
Why does your 305 idle ruff?
the answer is quite easy actually it falls into 3 catergories.timing is usually the first and best place to start,get a timing light and see where your timing is set,if it is outta time then correct it.secondly start by making sure your carbeurator is clean and operating the way it should be.is it delivering to much fuel or not enough make sure your fuel and air adjustments are correct especially on aftermarket carbs.and last but not least your camshaft,if it is an aftermarket cam and was installed professionally some cams are supposed to have a rough idle for instance.a crane cams energizer camshaft 272h thru 302h has a rough idle im using the 274h and atwith 274 degrees adv.duration and a gross lift of .450 degrees with an r.p.m range of about 1800-to 5800 i have a rough idle this is to be expected even if your an at home mechanic you should read about the cam you are using does it have smooth,good or rough idle they all work very efficently depending on your performance needs...
Is it possible to get your computer to use system idle process?
System Idle Process is what your computer does while your computer is idle. It does nothing for you or against you. And no, there's no way to use it other than making your computer go idle.
Can split ends be cured?
Once you have split ends there is actually no way of curing it apart from cutting them off. There are products you can buy such as certain conditioners and shampoos which say they get rid of them, they really only hide them. There are no hair products on the market which actually cure split ends, they all just hide them.
Where is the idle on a 4.3 6 cyl vortec?
The idle is adjusted by way of the Idle Air Control motor as directed from the Engine Control Module. The idle is computer controlled. I changeTHE IAC motor for a new one ,still there is a bit of a rough Idle, what can be the trouble
Is there a way to hide how old your account is on the Neopets boards?
No, you cannot hide your acct age on neo
Why does the rpms idle below 1000 on 2000 catera?
because it was designed that way... most engines idle below 1000.
