ati converters makes one
Place the jack under the differentials.
The speed sensor on a Chevy Silverado is located on the tailshaft of the transmission. To remove it, unplug the wire hardness, unscrew the bolt holding it in place, and pull it out.
The best place to look for a 1987 Chevy Silverado for sale is AutoTrader. You can purchase a copy of the AutoTrader magazine or go online to the AutoTrader website. Another place to look at would be on craigslist.
One could purchase a Chevy Silverado SS truck from their local Chevy dealer or one could check out their local used vehicle dealership. Ebay is a good place to find a Chevy Silverado SS truck if you don't mind paying to have it shipped or traveling to pick it up.
Chevy did not have a 350 in 2001 engine options were 5.3, 6.0. or big block
Your 1983 Chevy Silverado accelerator cable is held in place with swivel nuts on each end of the cable. Connect the accelerator cable and secure it by turning the swivel nuts to the right.
The 2002 Chevy Silverado dipstick tube is held in place with a retaining nut at the bottom of the dipstick tube. Loosen the retaining not in the dipstick tube will lift out.
Removing a 1991 Chevrolet Silverado door panel is pretty simple. All you will need to do is to remove the screws holding the door panel in place.
Yes. Your owner's manual will tell you how to place it in neutral.
The 1979 Chevy Silverado glove box latch is held in place with two retaining screws. Remove the retaining screws and the glove box latch will come off.
There is no schrader valve, you need to source an adapter to place between where the fuel line attaches to the intake manifold.
remove oil cooler lines from adapter held in place by 8mm bolt, if you remove the oil filter you will see 2 torx bit bolts they are t40 bit, undo all of that and its removed