0
yes
Zelda Heidenreich
Add your answer:
Earn +20 pts
Is there an owners manual for Grinnell E-2 Dry pipe valve?
yes
How do you connect copper propane pipe and shutoff valve?
Flare copper pipe and use a flared shutoff valve. If valve isn't flared, use an adapter fitting between copper flared pipe and valve.
Is the water line open or closed when the ball valve handle is in line with the pipe?
When the handle is in line with the pipe, the valve is open.
Is the pipe bellow egr valve need to have carbon cleaned from those passages?
Yes, clean the cabor buildup from the EGR valve and that pipe.
What is the function of Suction valve?
the suction valve is transfered fluid one pipe to another pipe at a specific pressure and quantity.
How can you tell if a ball valve is opened or closed?
The position of the handle indicates the direction of the opening through the ball, IE. handle in line with pipe, valve is open, tangent to pipe, valve is closed.
How do you pull pipe to check foot valve?
You disconnect the horizontal pipe from the vertical well pipe at the wellhead, and pull up the vertical pipe.
Where is cooling system bleed valve located on 1999 alero v6?
The coolant air bleed valve is located on the top of the thermostat bypass pipe/heater pipe assembly. Close the valve once a continuous stream of coolant is expelled from the valve.
What is main feed water stop valve?
It's a valve that regulates the main water pipe.
What is Equivalent length of pipe?
Equivalent length of a pipe is a term applied to express the pressure drop generated by valves and fitting in a pipe. In literature, you usually find ratios of equivalent length to diameter of the pipe. For example, L/D for a fully opened globe valve is 300. This means that, if you have a fully opened globe valve in a pipe and the internal diameter of the pipe is ID=0.05m, then the equivalent length for this globe valve =300*D=300*(0.05m)=15m. Equivalent length of 15 meters means that the globe valve generates the same pressure drop as as straight 15-meter long pipe.
What is the difference between a control valve and a gate valve in a stand pipe system?
a gate valve is a one way totally open or closed valve, a control valve is a variable valve.
What is the valve tube in a french horn?
Each valve on a french horn has a specific pipe coming off of it, known as the valve tube.
