I don't believe there are plans for a fifth Transformers movie at this time, so it's hard to say whether or not one will be made.
This type of a transformer is known as a step up transformer.
Yes, but your input current is going to be high at 133 amps. The output of the transformer is not going to be 16 KVA, that is the rating of the transformer.
By design are you going to wind the transformer yourself? In your design you need a 5:1 ratio. On the output side of the transformer any two legs of a three phase transformer is considered single phase voltage. Good luck on your project.
yes! there is going to be a transformers 4.
5
The secondary voltage of a transformer with a turns ratio of 5 to 1, and primary voltage of 200 is 40. (5 to 1)
It comes out 5/30
The coupling between windings will be nearly zero, resulting in nearly zero output. In short, your transformer's not going to work.
1- residual flux existing before enegizing the transformer . 2- size of transformer . 3- size of power system. 4- type of magnetic material of the core. 5- the method of energizing the transformer.
Yes, it's called a Transformer. Definitely the wrong answer. DC on a transformer is certainly going to blow it up. The answer is yes unless capacitor coupling is involved
You can use a transformer with a turns ratio of 24:5 to convert 24 VAC to 5 VAC. This means the primary winding has 24 turns for every 5 turns on the secondary winding, which will step down the voltage proportionally. Make sure the transformer is rated for the appropriate power and frequency.
The purpose of a transformer is to transform one voltage to another voltage. This can be in the configuration of stepping up the voltage or stepping down the voltage . The load is what establishes what the current from the transformer is going to be.