yes, as plating on connectors to protect from corrosion.
My Circuitboard City was created on 2009-03-02.
Motherboard
A 3DS capture card is a small circuitboard with a USB port. You open a 3DS up and insert the card, cutting a hole in the case for the USB port and splicing the circuitboard into the wires that connect to the screen. It can now intercept the visual data and this can be viewed via USB.
It is usually referred to as the "motherboard." Less common terms include "mainboard", "logic board", and "backplane."
In the fuse panel to the left and below the steering column. The full size trucks have an issue with taillights. These taillights have a circuitboard on the backside of them. They have been known to go bad.
You don't need to replace any bulbs or fuses. The problem lies within the circuitboard, which I am able to refurbish. Contact me a ANCTechnologies at hotmail
The timer is probably bad, if it won't advance the cycle will not start.
Get at the dashboard. Messy disassembly requires some patience, but you will eventually get to the burned-out bulb. Addition: It's more than likely NOT the bulb. The problem lies within the circuitboard itself. Contact me at ANCTechnologies at hotmail
If you bring it to a repair facility, they probably won't repair it. They'll just send out for a new one. The cost of repair/replacement is entirely dependent on which circuit board you are talking about. There are likely over 100 in your car.
gold
Gold Gold Gold was created in 2007.
BEST DIGITAL GOLD PLATFORM