Bandwidth is defined as a frequency span - the difference between a high frequency and a lower frequency. For the low end voice it depends if its male bass bariton tenor or female alto and soprano. A bass voice goes down to 100 Hz. The harmonics go up to 15 kHz. So the bandwidth for voices is arround 15 kHz.
Neither.baseband refers to the original voice signal itselfbroadband refers to a form of wide bandwidth data transmission (e.g. internet traffic)the modulated voice signal consists of a carrier frequency and two sidebands, the bandwidth of the sidebands varies depending on the form of modulation used as well as the bandwidth of the original baseband signal, to reduce transmission power it is possible to eliminate the carrier frequency and to reduce overall bandwidth one of the sidebands may be partially suppressed or eliminated completely (but one sideband must always be fully retained)
If you know that there will be slow bandwidth, then you must design the application in such a way that the amount of data transferred is reduced. Some optimizations may be required; or some sacrifices may have to be made, such as showing less images, or images in a lower quality.
Electrically small antennas are always narrow-band. The bandwidth of a small antenna has a theoretical maximum defined by the Chu Limit.
Bandwidth is the measure of range or band of frequencies that a channel or path can handle at a maximum rate. whereas, throughput is the average rate of successful message delivery over a communication channel. and Goodput is simply the changing in throughput rate.
How is the bandwidth of a band-reject filter determined
equal to that of the original voice signal. In practice, each voice input is usually assigned a bandwidth of 4 kHz. The band-pass filters following the modulators are used to restrict the band of each modulated wave to its prescribed range. The resulting band pass filter outputs
64 Kbps
It's simply because VoIP (Voice over Internet Protocol) uses Internet bandwidth to transmit voice signals. If you are noticing a significant loss in your connectivity rate, it's time to upgrade your Internet service.
A band plan is a plan for distributing or allocating bandwidth within a frequency spectrum.
Because voice communication uses more information to reproduce the person's tones and qualities over the line. Data is a digital signal composed of 1 & 0 - needing much less bandwidth.
Two such words are bandwagon and bandwidth.
it depend on the number of bits that used in adc used
It slow down the network speed, when there is slow bandwidth of internet. We can not use it on internet due to its not secure.We can use it on intranet as we are getting 100 mbps and 1 gbps bandwidth in LAN environment.
Bandwidth is defined as a frequency span - the difference between a high frequency and a lower frequency. For the low end voice it depends if its male bass bariton tenor or female alto and soprano. A bass voice goes down to 100 Hz. The harmonics go up to 15 kHz. So the bandwidth for voices is arround 15 kHz.
Low pass channel or medium with the bandwidth that starts from zero.Band pass channel has the bandwidth that does not start from zero.
Read this artical http://www.picometrix.com/pico_products/an_band_terms.asp