No. Current is the measure of the amount of electron flow in a circuit. Current is measured in amperes, or coulombs (6.242 x 1018 electrons) passing a point in a circuit in one second.
Voltage is electrical potential energy, measured in volts, or joules per coulomb.
Current and voltage are defined in such a way that current times voltage is watts, or joules per second. Further, the ohm (resistance) is defined such that one volt will produce one ampere through one ohm, creating one watt.
No. Voltage is the energy behind the charge that allows work to be done. Voltage is expressed in joules per coulomb.
Current is the flow of charge, in coulombs per second, also known as the ampere.
Resistance, in ohms, is defined by Ohm's Law as voltage divided by current, and is a measure of the degree of difficulty, or "resistance" that a circuit imparts to a voltage in its attempt to produce a current.
Power, in watts, in voltage times current, and is also known as joules per second.
(Items italicized in this answer, though not specifically asked in the question, were answered for completeness, and also because they were needed, i.e. "current", in order to develop the full answer.)
No. Volt is a measure of voltage (or electrical potential); ohm is a measure of electrical resistance.
Current measures the flow of electrons through a circuit and voltage basically measure the amount of available electrons.
voltage is the amount of energy an electron carries
A voltmeter is used to measure voltage. A potentiometer is used to vary the amount of resistance in a circuit - it has nothing to do with measuring.
If you are just using the load to pull a small amount of current, then yes a electronic circuit can be used for that. If you want a resistive load to measure voltage drop or something similar, then no an electronic circuit will usually not work for that.
Ohm's law states that the current in a circuit is inversely proportional to the circuit resistance. There is a single path for current in a series circuit. The amount of current is determined by the total resistance of the circuit and the applied voltage.
A volt meter is used to detect the presence of voltage, and it also measure the amount of voltage (electrical pressure) in a circuit.
There must be current flow through the circuit to measure any voltage
this is the amount of voltage a circuit can hold.
Current measures the flow of electrons through a circuit and voltage basically measure the amount of available electrons.
voltage is the amount of energy an electron carries
No it cant. Voltage = Current x Resistance. So at constant Voltage if the Resistance is increased, Current will reduce
No. Parts of a series circuit have the same amount of current, but not necessarily the same amount of voltage.
They call that "voltage" or EMF.
A voltmeter is used to measure voltage. A potentiometer is used to vary the amount of resistance in a circuit - it has nothing to do with measuring.
If you are just using the load to pull a small amount of current, then yes a electronic circuit can be used for that. If you want a resistive load to measure voltage drop or something similar, then no an electronic circuit will usually not work for that.
The unit of measure for amount of electricity is voltage.
The primary application of a digital DC voltmeter is to display the amount of DC current present in a circuit. This is particularly handy when troubleshooting problems.