1998 jaguar xj8 Remote Program Instructions
you need to open your trunk, turn ignition only to 2nd notch (do not start) toggle your valet switch 4-5 times till you hear a chirp (this indicates the vehicle is now in learn mode)
Hold your remote button till lights flash and car will chirp once more to let you know remote has been set.
Programing a remote key on a jaguar s type has to be done by a jaguar service center. Only authorized technicians should do it because often, people end up spoiling the remote system when they program it on their own.
My 98 Ram sport does it is a control module behind the dash if your does not and can be installed quick at the dealer .
Try turning the ignition on and off about 10 times until the door locks, lock and unlock, then lock with the remote done.
The ignition key has a transponder in it. Without the dealer programming the transponder, the key will not start the car. You can get a key made at your local Jaguar dealership for about $85 including the necessary programming. Some automotive locksmiths provide this service. I am an automotive locksmith and I cut and program the keys that you speak of.
Jaguar S-Type was created in 1998.
where is the starter located on a jaguar xk8?
Where is the Electronic Control Mo ule locate on a 1998 Jaguar Van an plas
1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. 2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming. 3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming. 4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
What year? If you own a 1998 or newer Jaguar there is none.
Yes, the Jaguar XK8 does have a fuel pump.
Replace the remotes battery
Unifying Theories of Programming was created in 1998.