0
It's not broken, the power has been disconnected(flat battery, radio removed, blown fuse). Just do as the radio says, turn the key to the auxillary position, switch the radio on, wait 2 hrs and then enter the code.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you enter Nissan navara D22 radio code?
To enter radio codes for your Nissan Navara D22, check the owner's manual. There will be specific instructions on how to enter your code correctly.
How do you clear code wait after entering the wrong radio code on BMW roadster?
If it states code wait on the radio then you must turn the key to the first click or position in the ignition then allow the vehicle to sit for 1 hour. After 1 hour you will be able to re-enter your code incorrectly up to 3 times before it will state code wait on the radio again.
How do you Fix your radio in your 1999 SLK230 that is stuck in WAIT mode?
You need the 5-digit code for the radio. The system locks when power has been disabled or the radio removed from the vehicle. Call a MB dealership. I have the same problem with my '99 SLK230. I know the code too. The book says if power has been interupted and the code has been entered incorrectly more than 3 times, the system will lock itself out. However, the book also says that once the radio is on again it should reset itself in 10 minutes or so. I have let my car run with the radio turned on for more than 30 minutes and it didn't reset so I could enter the code. Now, does anyone know how to fix this?
Does a wireless router broadcast or transmit radio waves when no computers are connected or does a router wait for a signal from the computers wireless adaptor before transmitting and radio waves?
It has to always be broadcasting radio waves otherwise no devices will ever find the router.
My alfa romeo radio says WAIT after i enter the code and doesnt move off this. What does this mean and how do i get off it?
Turn the ignition to MAR so the radio is on and then leave the key there for 2 - 3 hours without starting the car. it worked on my 147. you can get the code off the web for free from a couple o sites, just look for them. you'll need the serial number of the radio might be in the manual otherwise you need to pull it out of the console and get the s/n off the side. good luck.
Dodge sprinter van radio says wait?
So wait
How do you reset a 1990 accord ecu?
pull radio fuse, says back up... wait 10 mins.. replace... or disconnect battery for 10 mins, reconnect
How do you reset radio code in a BMW?
To set your radio follow this procedureTurn car onTurn radio on, then off.Turn radio back on, a message CODE will appear.Enter code using the preset buttonswhen finished entering code, press the > button and you will hear sweet sounds of music!**if your radio says CODE WAIT, you will have to wait for an hour or so for the car to reset the code. There is NO WAY around this if your radio says CODE WAIT**If you do not have the code for your radio,Find out what model you have:turn car onturn radio on, then offTurn radio back on and press and hold the M button for 10 secondsa code will display on the radio with your model number of the radio.Call your local BMW dealer and tell them you have the serial # for the radio and need the code, be nice. If they cant/ wont give you the code, look up another dealer and call them, continue to call until a nice dealer gives you the info DO NOT PAY FOR IT!Source(s):Have owned many cars including 6 BMWs and 2 Mercedes
How do you get the wait signal off the radio on ML 350?
Turn the ignition lock on and the radio on and wait. It can take up to a couple of hours depending on how many times the incorrect code has been inputed in the radio.
How do you enter radio codes for 1990 190e?
Turn your ignition swith to on position,turn your radio on,code should appear on the screen of your radio. After code appears,enter first digit of your code. wait for first digit to flash. Then enter second digit,wait for flash,Then enter third digit,wait for flash. Then enter fourth digit, wait for flash. Then push * on your radio to except the code.
Land Rover radio code says Wait. What do I do?
Every time a wrong code is entered the wait time doubles, you must just sit the wait time out with ignition on & re-enter correct code ( various proceedures for various models) or try disconnecting battery for an hour or so....... Good luck :-)
What song by Slipknot says inside my shell I wait and bleed?
Wait and Bleed.
Mercedes radio slk stays on wait?
If you've recently interrupted the power supply (battery) then you will need to input the radio code. The code should be in your paperwork, if not, contact your dealer for the code. The "WAIT" code on the radio means you have input the wrong code more than 3 times and you have to wait 10 minutes before attempting to enter radio code.
What part of a radio is the process?
Please wait while loading...
When a woman says you don't have to wait for me?
She may mean, " wait for me " if she likes you and if she doesn't like you she means, " don't wait for me. "
How do you listen to radio?
u press turn on the radio wait nm i dont know which kind the kind in a car or...............
What if it has a loading bar and says waiting?
Then you wait.
