Do the simple thing first. Replace the batteries in the keyfob. The batteries are available at any big box store and if they have a jewelry department they might change them for you.
fuse 15
Had the same problem on my 406 coupe 3.0ltr-Try turning on ignition and pressing the keyfob-worked for me, good luck!
If you have 1 key: Switch on the ignition, press the large keyfob twice within 10 seconds. If you have 2 keys: You will need to check which is primary and which is secondary, open the keys and there should be a small label inside with either PRIM or SEC. Switch on the ignition and press the large button on the primary keyfob first, then the secondary within 10 seconds. NB: Some models require the battery to be removed from the keyfob for a minute before recoding. The above worked fine for my 2000 (W) Pug 406 HDi
Fuse 15
The phone number of the Museum At Central School is: 406-756-8381.
You can try to knock on the dashboard area around the speedometer. Or you could resolder the PCB on the backside of your speedo. A very common problem on 406's You can try to knock on the dashboard area around the speedometer. Or you could resolder the PCB on the backside of your speedo. A very common problem on 406's
switch ignition on press lock button for 10 secs switch ignition off leave for 5 secs your remote should be coded
17% of 406= 17% * 406= 0.17 * 406= 69.02
Fuse no 23 20 amps
406 is already an integer. So the answer is 406.
Please can you help me the radio on my Peugeot 306 the sound is not working
406 = CDVI