You will need to push the caliper piston back as well as rotated when you are replacing your rear brake pads. The caliper will need to be turned clockwise.
Brass washers replaced when caliper replaced?Fitting tightened completely?
Clockwise
Rear caliper to rear caliper bracket bolts, 32 ft. lbs.
brake hose is bad
if the caliper is stuck u need to replace the caliper it is also a wise move to buy a matched pair of calipers, cheaper , and replace both sides at same time
Bolts on the caliper of a 1999 Monte Carlo will loosen to the left and tighten to the right.
You've either got a bad Brake hose or bad master cylinder. Both these things can cause a caliper to stick.
Clockwise to retract piston into caliper body
left
most likely? the caliper needs replacing.
First and very importantly, you must know what type of caliper you have. Some confess with a clamp. Other twist in. If you attempt to clamp a twist in style caliper it will be damaged.
Turn counterclockwise to remove them.