The SRS (supplemental restraint system) is just that, a system. It is not just one part in one location. It is a combination of parts in different locations. The sensors, and air bags all make up the system.
Depends on the year which you fail to list. Look on the passenger side of the dash for the letters SRS. If there is an air bag you will see SRS written on the location of the air bag.Depends on the year which you fail to list. Look on the passenger side of the dash for the letters SRS. If there is an air bag you will see SRS written on the location of the air bag.
It is on because there is a problem with the SRS. Take it to a professional, as working on the SRS is dangerous and not a DIY job.
To reset the SRS light in a 2003 C320 Mercedes Benz, unhook the battery. Leave the cables disconnected for around 10 minutes.
Changing the battery should have no bearing on the SRS light, and it may just be a coincidence. Regardless, do not attempt to repair the SRS. Working on this system can cause serious injury. Take it to a professional, as something is wrong with the system.
It is illegal to modify the SRS without consent from the NHTSA.It is illegal to modify the SRS without consent from the NHTSA.
The 2003 Honda Odyssey SRS wiring diagram can be obtained from most Honda dealerships. The wiring diagram can also be found at most auto-parts stores.
Take this truck to a professional for repair. Working on the SRS is hazardous and is not a DIY repair. Something is wrong with the SRS or the light would not be on.
it is under the center console, in front of the shifter
If the SRS light is on in a 2003 Acura, it means there is a potential problem with the seat belts or airbags. The car should be taken to a dealer find the exact problem because the airbags may not be working and this could be dangerous.
It is on because there is a problem with the air bag (SRS) system. It will be reset when the problem is repaired. Working on the SRS can be very hazardous and for that reason this is not a DIY repair. Take the vehicle to a professional for repair.
By taking it to a professional for service. Something is wrong with the SRS, and this is not a repair job for the novice. Serious injury can occur when dealing with the SRS.
Working on the SRS can be very hazardous. For this reason I suggest you have this repaired by a professional.