1987 was the cross over year for these. If you have a fuel injected engine it is in the fuel tank. If you have a carb model it is located ( from the driver seat ) on the front right side of the engine at the bottom of the engine. There is a trick to holding the push rod up on these. There is a short bolt in the front of the engine near the fuel pump that you will remove, install a longer bolt in the hole to pinch the push rod tight, change out pump. remove long bolt and install short bolt. hole must have short bolt or it will leak oil excessively. The only purpose of this hole is to aid in fuel pump change.
inside frame , drivers side
Chevy S10 fuel filterI am looking for the fuel filter on a 1987 Chevy s10 blazer 4x4. I looked at the driver side frame rail and cannot find it. Can anyone help.
Inside the fuel tank. The fuel tank must be removed to gain access.
On the fuel rail in front of your passenger side fuel tank or possibly the other side.
That vehicle would have throttle body fuel injection in which case it would have two fuel injectors.
No it is not. It is a mechanical pump that bolts to the block it may have 7 to 8 LBS. of pressure only.
Either 16 or 20 gallons fuel tank capacity, depending on the model of Chevy pickup.
in the fuel tank
its located in the fuel tank
It is inside of the fuel tank.
On the fuel line.
Yes, this is possible. It could be many things.