If there is a loud noise when shifting from park into drive, it may be a transmission problem. One should shift slowly, as the transmission could disengage itself.
You should have to depress the break pedal while shifting out of Park.
You must apply your foot on the brake while shifting into drive.
the neatrul switch
Check the heat shield.
The noise ordinance for the city of Cedar Park, TX prohibits loud noise between 11:00 p.m. and 7:00 a.m. daily. Violators of the noise ordinance can be guilty of a class C misdemeanor.
Your probably letting your transmission roll forward or backwards after you put it into park. This puts pressure on the transmission where it stops and it "pops" out of park for this reason, making the loud noise. Apply the E-Brake after putting it into park but before you let off the regular break, it wontcontinue to roll.
I'm stumped. Can you help answer this question? This a normal sound for the Sebring, I've had two and they both make that sound when shifting form park to drive. No tranny problems.
The most common problem I have seen is a failed motor or trans mount.
U-joint is the first place to look. Second would be worn ring and pinion gear.
most of thetimeit is worn out u-joints. check those to see if they are bad
You may have a drive line universal going out or worn really bad. Check both universals and replace both.
when the vehicle is parked they are raising the motor, Or when passing by it rattles the window