Technology
Gigahert
You have to go to a dealership. They electronically program it with a machine.
RET instruction needs 3 machine cycles. One to fetch and decode the instruction(4 T states), and two more machine cycles(i.e. 2*3=6 T states) to read two bytes from the stack(stack is exterior to microprocessor, stack is in R/W memory, so to exchange data with stack needs machine cycles). Thus, RET instruction needs total 3 machine cycles and 10 T-states.
when the number of cycles a machine works more than 1e4 cycles. please check for the answer
101Improved Answer:-It is: lxi or LXI = 61
It is: lxi or LXI are both equal to 61
Depending on the particular microprocessor, a machine cycle is the fetch or store of one (typically, one byte) native word. In the 8085, this is a byte fetch or store, plus the overhead in decoding and processing the instruction. In this case, the first machine cycle is four clock cycles, or T states, and subsequent machine cycles are three clock cycles, although certain instruction sequences, such as DAD, require two extra clock cycles.
the clock oscillator and machine cycle state machine, it may take multiple clock cycles per machine cycle.
12
an instruction cycle may consist of a number of machine cycles.
In a modern washing machine, the wash, rinse and spin cycles are controlled by special purpose (embedded) computers.